GrowBot body template

No 3D printer? Print this at full size and cut the base plate and the two legs out of any stiff flat material (about 4.5 mm thick).

Print at 100%, actual size, with Fit to Page off. Then check the square measures 50 mm before you cut. Screens are not to scale, only the printed page is.

CHECK 50 mm 2 in Print at 100% (actual size). Each side of this square must measure 50 mm (2 in). If it is smaller, your printer shrank the page. Reprint with Fit to Page turned off. BASE PLATE (cut 1) 170 x 68.6 mm / 6 11/16 x 2 11/16 in LEGS (cut two the same) LEG 84 x 21 mm / 3 5/16 x 13/16 in LEG 84 x 21 mm / 3 5/16 x 13/16 in